19
Notes:
If Off is selected, Power Fail Back-Up mode will
not be enabled.
If Auto is selected, the registered handset(s)
will display Out of range OR no power at base
and Put HS ON base to power base alternately
when mains power interruption occurs. Place the
not lower than level 2) onto the main base unit
to activate Power Fail Back-Up and start up the
base. If handset is already on the main base unit it
will automatically activate the Power Fail Back-Up
up the base. If AUTO is selected and handset is
not returned to base unit within approximately
2 minutes the handset will temporarily revert to
Manual mode to converse battery power.
If Manual is selected, the registered handset(s) will
display To power BS Press TALK-OFF when mains
power interruption occurs. Press OFF/CLEAR and then
place the handset onto the main base unit to activate
the Power Fail Back-Up mode and start up the base.
•
•
•
The feature is preset to Auto. You may also manually
change the power fail back-up settings.
Using a handset:
Press
MENU when the handset is not in use.
Press
or to scroll to Settings.
Press
SELECT and or to scroll to Power outage.
Press
SELECT and or to select Auto, Manual, or Off.
Press
SELECT to save your selection. You hear a
1.
2.
3.
4.
5.
To Next Page
Loading...
Need help?
General
