102
If you have subscribed to Calling Number Display service,
automatically by adding numbers into the block list,
and/or all calls without number.
When there is a call from the number saved in the block
list, the call will be disconnected.
Blocked calls are treated as new call log entries,
the name of the call log will be replaced with
Blocked call.
ADD A bLOCk LIsT ENTRY
1. Press
MENU in idle mode to enter the main menu.
Press
or to scroll to Call guard.
Press
SELECT twice to select Block list.
Press
or to scroll to Add new entry.
Press
SELECT. The screen displays ENTER NUMBER.
5. Use the dialing keys to enter a telephone number.
Press
or to move the cursor to the left or right.
Press MUTE/DELETE on a handset, or X/DELETE
on the telephone base, to erase a digit.
Press and hold MUTE/DELETE on a handset, or
X/DELETE on the telephone base, to erase all
digits.
Press and hold 0 on a handset, or REDIAL/PAUSE
on the telephone base, to enter a dialing pause
(a P appears).
•
1.
2.
3.
4.
•
•
•
•
CALL GUARD
To Next Page
Loading...
Need help?
General
