49
AUTO CONNECTION
When an active device moves within Bluetooth range
of the telephone base, or is turned on within range, the
telephone base tries to connect to the device. When
the device moves out of range, it is disconnected. Your
device might make a connect or disconnect sound.
A connected device could also be disconnected by:
Turning off the Bluetooth device.
Turning off the Bluetooth feature of the device.
Disconnecting through the telephone base Device list.
If you disconnect through the Device list, the telephone
base will not attempt to reconnect until your device
is moved out of range and then moves back in range
again.
bLUETOOTH CONNECTION fROM IDLE MODE
When you have active devices that are not connected,
CONNECT appears on the telephone base in idle mode.
Press CONNECT to start connecting an active device.
When there are two active devices, the screen will
prompt you to choose one before connection.
•
•
•
To Next Page
Loading...
