VTech 15850 - Remote Access Code

119
Press or to highlight Ans sys setup, then press
SELECT.
Press
or to highlight # of rings, then press
SELECT.
Press
or to highlight 6, 5, 4, 3, 2, or Time savor.
Press
SELECT

REMOTE ACCEss CODE
A two-digit security code is required to access the
answering system remotely from any touch-tone
telephone. The preset code is 19. You can set the code
from 00 to 99.
To change the remote access code:
Press
MENU idle mode to enter the main menu.
Press
or to highlight Answering sys, then press
SELECT.
Press
or to highlight Ans sys setup, then press
SELECT.
Press
or to highlight Remote code, then press
SELECT.
Use the dialing keys to enter a two-digit number.
Press
SAVE
Note: Remote access can only be used if this function
is activated.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.