VTech Cordless Telephone - Handset Operation; Making Calls; Answering Calls; Flash Function

www.vtechphones.com
15
Basic operation
Handset operation
Making calls
• Press (or SPEAKER to use the handset speakerphone feature),
then dial the phone number.
-OR-
Dial the phone number first, then press
(or SPEAKER).
• To end your call press
OFF or place the handset in its base.
Answering calls
• Press , SPEAKER or any dialing keys.
• Press
OFF to end your call or place the handset into its base.
Flash function
You can use your phone with services such as call waiting.
When you subscribe to call waiting service from your telephone
company, press to switch to the new call when you receive a call
waiting signal. Press again to switch back to the original call.
Handset volume
The volume control is on the right side of the handset. During a call, press
the VOL or keys to adjust the listening volume to a comfortable
level. When you reach the maximum or minimum setting, a double
beep will sound. (Follow these instructions to change the volume for
the handset, speakerphone or headset.)
Redial
• When the handset is idle, press REDIAL/PAUSE to display the last
five telephone numbers dialed from the handset (up to 32 digits for
each number). Use or to scroll through the last five numbers
dialed. When the beginning or the end of the redial list is reached, a
double beep will sound.
• The procedure
to change
the volume is
the same for
the handset
earpiece,
speakerphone
and headset.