VTech Cordless Telephone User Guide

www.vtechphones.com
27
Basic operation
Handset settings
• The handset will
not ring when a
call comes in if
ringer volume
is at the lowest
setting.
Ringer volume
• With the handset in idle (off) mode, press MENU then press or
until RINGER VOLUME is shown.
• Press
SEL. You will hear a sample of the ringer.
• Press
, or a digit (0 through 6). You will hear a sample of the
new ringer volume and the volume bar will be increased or decreased
each time the setting is adjusted. At the lowest setting the display will
show:
- OR -
• With the handset in idle (off) mode, press
or of the volume control
on the side of handset will directly go to ringer volume menu.
• Press
or to adjust the ringer volume and the ringer volume will
be saved automatically.
Ringer tone
• With the handset in idle (off) mode, press MENU then press or
until RINGER TONE is displayed.
• Press
SEL. Then press , or a digit (0 through 9) to sample the
ring tones.
• Press
SEL to confirm.
Key tone
• With the handset in idle (off) mode, press MENU then press or to
until KEY TONE is displayed.
• Press
SEL. The current setting will be shown. Press or to see
ON or OFF. When set to ON, the handset will emit a beep whenever
a key is pressed.
• When the desired option is shown, press
SEL. Key tone is preset to
ON.

VTech Cordless Telephone Specifications

General

Caller ID	Yes
Call Waiting	Yes
Speakerphone	Yes
Backlit Display	Yes
Intercom	Yes
Number of Handsets	Varies by model (1-6)
Answering Machine	Varies by model (some models)