VTech Cordless Telephone User Guide

www.vtechphones.com
35
Basic operation
Answering system operation
Set the remote access code
1. Press SETUP twice and you will hear “Remote access code. To change
the setting, press change.”
2. Because the remote access code was set to
19 at the factory, press
CHANGE and you will hear the default code “19”.
3. Press and release
CHANGE to advance the remote access code
number by one. Press and hold CHANGE to advance the remote
access code by 10.
4. When the desired number is heard. Press
SETUP to save and advance
to the next menu option or press PLAY/STOP /
to save and exit.
Remote answering system operation
1. From any touch tone telephone, dial your telephone number.
2. While the outgoing announcement is playing, enter your two-digit
remote access code.
3. Hang up to end the call and save all undeleted messages.
If you pause for more than 10 seconds during remote access, you will hear
a help menu listing all features and commands. If no command is entered
for the following 20 seconds, the call will end automatically.

VTech Cordless Telephone Specifications

General

Caller ID	Yes
Call Waiting	Yes
Speakerphone	Yes
Backlit Display	Yes
Intercom	Yes
Number of Handsets	Varies by model (1-6)
Answering Machine	Varies by model (some models)