VTech Cordless Telephone - Edit a Number;Name Stored in Memory; Delete a Number;Name Stored in Memory

14
Basic Operation
4 Press SELECT . The screen displays ERASE NO YES and the number.
The current choice flashes.
5 Press until YES flashes.
6 Press SELECT . You will hear a beep confirming the deletion.
Telephone Memory
5 When you finish entering the name, press SELECT or PROG/CHAN. The
screen displays ENTER NUMBER.
6 Enter the telephone number. Use to backspace and make a correction. Press
REDIAL/PAUSE to store a pause in the dialing sequence.
— OR —
Press REDIAL/PAUSE to display the last number dialed from this phone.
7 Press SELECT or PROG/CHAN to store your entry. The screen displays
DISTINCT RING? and the current setting.
8 Press or to change the setting. Choose Y (for Yes) if you wish the phone
to alert you to calls from this number by changing to a distinctive ringing
pattern after the first ring. Choose N (for No) for a normal ringing pattern.
9 Press SELECT or PROG/CHAN to confirm your selection. If you chose Y in
Step 8,a D will be displayed with the directory entry.
Edit a Number/Name Stored in Memory
1 Press MEM . The screen displays ENTER 0-9.
2 Press the memory location key of the entry you wish to edit.
3 When the screen displays the number you want to edit, press SELECT .
Then press until EDIT flashes.
DIAL
EDIT ERASE
9735550123
4 Press SELECT . The screen displays the name and number. The flashing
cursor appears at the end of the name. Use , and the dial pad keys to
edit the name. Press SELECT to move on to edit the number. Use to
backspace and make corrections. Press SELECT to move on to edit the
Distinctive Ring setting.
5 Press SELECT to save the edited information.
Delete a Number/Name Stored in Memory
1 Press MEM . The screen displays ENTER 0-9.
2 Press the memory location key of the entry you wish to delete.
3 When the screen displays the number you want to delete, press SELECT .
Then press until ERASE flashes.
DIAL EDIT ERASE
9735550123