17
Basic Operation
7 Press or to change the setting. Choose Y (Yes) if you wish the phone to
alert you to calls from this number by changing to a distinctive ringing pattern
after the first ring. Choose N (No) for a normal ringing pattern.
8 Press
SELECT
or
PROG/CHAN
to confirm your selection. If you chose Y in
Step 7,a D will be displayed with the directory entry.
Note: When memory is full the screen displays
MEMORY FULL
, an error tone
sounds, and you will not be able to store a new number until you delete a stored
number.
Edit a Number/Name Stored in the Directory
1 Press ( ). The screen displays DIRECTORY.
2 Press or to scroll alphabetically through entries stored in memory
— OR —
Press the dial pad key for the first letter of the entry you want to edit.
3 When the screen displays the number you want to edit, press
SELECT
.
Then press until EDIT flashes.
4 Press
SELECT
. The screen displays the name and number. The flashing cursor
appears at the end of the name. Use , and the dial pad keys to edit the name.
Press
SELECT
to move on to edit the number.Use to backspace and make
corrections. Press
SELECT
to move to edit the Distinctive Ring setting.
5 Press
SELECT
to save the edited information.
Delete a Number/Name Stored in the Directory
1 Press
( ). The screen displays DIRECTORY.
2 Press or to scroll alphabetically through entries stored in memory
— OR —
Press the dial pad key for the first letter of the entry you want to delete.
3 When the screen displays the number you want to delete, press
SELECT
.
Then press until ERASE flashes.
4 Press
SELECT
. The screen displays ERASE NO YES and the number.
The current choice flashes.
5 Press until YES flashes.
6 Press
SELECT
. You’ll hear a long beep confirming the deletion.
Telephone Directory
DIAL EDIT ERASE
9735550123
DIAL EDIT ERASE
9735550123
To Next Page
Loading...
