27
Basic Operation
Connect with the Answering System
You can access many features of this system remotely from a touch tone phone.
1 Dial your telephone number.
2 When the system answers, enter your Remote Access Code (preset to 50).
The system beeps once and then announces the number of new messages.
3 Enter a remote command (see Remote Access Commands).
4 Press
*
0
to exit remote operation.
Voice Menu
The system has voice prompts to help you with remote operation. Press
*
5
to hear the menu while remotely connected to the answering system.
Remote Access Commands
Function: Command:
Play messages in Press
#
, then the appropriate mailbox
a mailbox number (
1
,
2
, or
3
). The system plays
new messages. If there are no new
messages, the system plays old messages.
Repeat a message Press
#
4
while message is playing;
each press backs up another message.
Skip a message Press
#
6
while message is playing;
each press advances up another message.
Stop Press
# 5
.
Save messages Hang up.
Delete message Press
# 9
while message is playing.
Review announcement Press
# 7
; system plays announcement,
then beeps.
Record announcement Press
* 7
; after beep, record announcement,
press
# 5
to stop. System plays back
announcement.
Answering System Operation - Access
From a Remote Location
To Next Page
Loading...
