VTech CS5119 User Manual

13
2. To answer the intercom call on the
destination handset, press , ,
INT or any dialing key on the
destination handset. The outside call
is still on hold and both handsets
now display Intercom. You can now
have a private conversation with the
destination handset.
NOTES
• To cancel the intercom call before it is
answered, press , OFF or INT.
• If the destination handset does not
answer within 100 seconds, is in use, on
a call or is out of range, the originating
handset displays Unable to call and then
reconnects to the outside call.
3. For this intercom call, you have the
following options:
• You can let the destination
handset join you on the outside
call in a three-way conversation.
Press and hold INT on the
originating handset.
• You can transfer the call. Press
OFF, or place your handset back
in the telephone base or charger.
Your handset displays Line in
use. The destination handset is
then connected to the outside call.
• You can press INT to switch
between the outside call (Outside
call displays) and the intercom
call (Intercom displays).
• The destination handset can end
the intercom call by pressing OFF,
or by placing the handset back
in the telephone base or charger.
The outside call continues with the
original system handset.
Phonebook
The phonebook can store up to
50 entries, which are shared by all
handsets. Each entry may consist of a
telephone number up to 30 digits, and a
name up to 15 characters.
Any additions, deletions or edits made
on one handset will be reflected on other
handsets.
If the telephone number in the
phonebook exceeds 15 digits, a dash
appears after the 14th digit and then the
remaining digits are shown beginning
with a dash, alternately.
Add a phonebook entry
1. Enter the number when the phone is
not in use. Press MENU, then go to
Step 3.
-OR-
Press MENU when the phone is
not in use, then press SELECT to
choose Phonebook. Press SELECT
again to choose Add new entry.
2. When Enter
number displays,
use the dialing keys
to enter the number.
-OR-
Copy a number from
the redial list by
pressing REDIAL and then press q,
p or REDIAL repeatedly to select a
number. Press SELECT to copy the
number.
3. Press SELECT to
move on to enter the
name. The handset
displays Enter
name.
Enter number
_
ECO
ANS ON
Enter name
ECO
ANS ON

VTech CS5119 Specifications

General

Speakerphone	yes
Paging Locator	yes
Volume Control	yes
Intercom	no
Incoming Lines	1
Caller ID	yes
Call Waiting	yes
Flash Function	no
Caller ID Memory	30 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Backlit Keypad	no
Keypad Location	handset