VTech CS5119 User Manual

19
3. Use the dialing keys to edit the
number, then press SELECT. The
handset displays Enter name and
then the stored name.
4. Use the dialing keys to edit the
name. Additional key presses show
other characters of that particular
key. The first character of every word
is capitalized.
5. Press SELECT to save. You hear a
confirmation tone.
Save a caller ID log entry to the
call block list
1. When in the caller ID log, press q or
p to browse.
2. When the desired caller ID log entry
displays, press SELECT twice to
choose To Call block. The handset
displays Enter number and the
stored number.
3. Use the dialing keys to modify the
number, if necessary. Then press
SELECT. The handset displays
Enter name and then the stored
name.
4. Use the dialing keys to modify the
name, if necessary. Then press
SELECT to save. You hear a
confirmation tone.
Delete a call block list entry
1. Search for the desired entry in the
call block list (see Review call block
list).
2. When the desired call block list entry
displays, press DELETE and you
hear a confirmation tone.
Mute rst ring
Your telephone rings once for blocked
calls. You can choose to mute the first
ring for all incoming calls, so that there
will be no ring for blocked calls. By
default, the first ring is set to On.
1. Press MENU when the handset is
not in use.
2. Press 7464# on the handset.
3. Press q or p to choose First
ring:On to keep the first ring, or
First ring:Off to mute the first ring.
4. Press SELECT to save. You hear a
confirmation tone.
NOTE
• If you have muted the first ring, you will
hear one ring less before the voicemail
answers the incoming calls.

VTech CS5119 Specifications

General

Speakerphone	yes
Paging Locator	yes
Volume Control	yes
Intercom	no
Incoming Lines	1
Caller ID	yes
Call Waiting	yes
Flash Function	no
Caller ID Memory	30 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Backlit Keypad	no
Keypad Location	handset