VTech CS5119 User Manual

20
4. Press SELECT to save. You hear a
confirmation tone.
NOTES
• If the ringer volume is set to Off, the idle
screen displays .
• When the ringer volume is set to Off, the
handset still rings when you press FIND
HANDSET at the telephone base.
Temporary ringer silencing
When the telephone is ringing, you can
temporarily silence the ringer without
disconnecting the call. The next call rings
normally at the preset volume.
• Press CANCEL or MUTE. The handset
displays Ringer muted and .
Quiet mode
You can turn on the quiet mode for a
period of time (1-12 hours). During this
period, all tones (except paging tone) are
muted.
To set the duration and turn on the
quiet mode:
1. Press and hold when the
handset is not in use.
2. The handset displays Quiet: _ _
hours. Use the dialing keys (0-9) to
enter the desired duration (1-12).
3. Press SELECT to save. You hear a
confirmation tone.
The handset displays Quiet mode on
and .
NOTE
• When you change the settings of the ringer
tone or ringer volume, you can still hear
the samples even if the quiet mode is on.
To turn off the quiet mode:
• Press and hold when the
handset is not in use. The handset
displays Quiet mode off briefly and
then returns to idle.
Sound settings
Key tone
You can turn the key tone on or off for
each handset.
1. Press MENU when the handset is
not in use.
2. Press q or p to choose Settings
and then press SELECT.
3. Press q or p to choose Key tone,
then press SELECT.
4. Press q or p to choose On or Off,
then press SELECT to save. You
hear a confirmation tone.
Ringer tone
You can choose from different ringer
tones for each handset.
1. Press MENU when the handset is
not in use.
2. Press q or p to choose Ringers
and then press SELECT.
3. Press q or p to choose Ringer
tone, then press SELECT.
4. The screen displays Tone: with the
current setting displayed. Press q or
p to sample each ringer tone.
5. Press SELECT to save. You hear a
confirmation tone.
NOTE
• If you turn off the ringer volume, you will
not hear ringer tone samples.
Ringer volume
You can adjust the handset ringer
volume level, or turn the ringer off.
1. Press MENU when the handset is
not in use.
2. Press q or p to choose Ringers
and then press SELECT twice.
3. Press q or p to sample each ringer
volume level.

VTech CS5119 Specifications

General

Speakerphone	yes
Paging Locator	yes
Volume Control	yes
Intercom	no
Incoming Lines	1
Caller ID	yes
Call Waiting	yes
Flash Function	no
Caller ID Memory	30 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Backlit Keypad	no
Keypad Location	handset