14 15
Save a caller ID log entry to the
directory
1. When in the caller ID log, press q or
p to browse.
2. When the desired caller ID log entry
displays, press SELECT. The handset
displays Edit number and the stored
number.
3. Use the dialing keys to modify the
number, if necessary. Then press
SELECT. The handset displays Edit
name and then the stored name.
4. Use the dialing keys to modify the
name, if necessary. Then press SELECT.
The handset displays Saved and then
you hear a confirmation tone.
While entering names and numbers, you
can:
• Press DELETE to backspace and erase a
digit or character.
• Press and hold DELETE to erase the
entire entry.
• Press q or p to move the cursor to the
left or right.
• Press and hold PAUSE to insert a dialing
pause (for entering numbers only).
• Press 0 to add a space (for entering
names only).
Delete the caller ID log entries
1. When in the caller ID log, press q or
p to browse.
2. When the desired caller ID log entry
displays, press DELETE. You hear a
confirmation tone.
through the choices.
5. Press SELECT to save. You hear a
confirmation tone.
• If you turn off the ringer volume, you will not
hear ringer tone samples.
Ringer volume
You can adjust the ringer volume level, or
turn the ringer off.
1. Press MENU when the handset is not
in use.
2. Press q or p to choose Ringers and
then press SELECT twice.
3. The screen displays Volume: with the
current setting flashing. Press q or p
to choose a volume level. A sample of
each ringer volume plays as you scroll
through the choices.
4. Press SELECT to save. You hear a
confirmation tone.
• If the ringer volume is set to Off, the idle
screen displays Ringer off.
• When the ringer volume is set to Off, the
handset still rings when you press /FIND
HANDSET at the telephone base.
To delete all caller ID log entries:
1. Press MENU when the phone is not in
use.
2. Press q or p to select Caller ID log
and then press SELECT.
3. Press q or p to
select Del all calls
then press SELECT.
4. The screen displays
Delete all?. Press
SELECT to confirm.
The handset displays
Deleting... and then
you hear a confirmation tone.
Sound settings
Key tone
You can turn the key tone on or off.
1. Press MENU when the handset is not
in use.
2. Press q or p to choose Settings and
then press SELECT.
3. Press q or p to choose Key tone, then
press SELECT.
4. Press q or p to choose On or Off,
then press SELECT to save. You hear a
confirmation tone.
Ringer tone
You can choose from different ringer tones
for each handset.
1. Press MENU when the handset is not
in use.
2. Press q or p to choose Ringers and
then press SELECT.
3. Press q or p to choose Ringer tone,
then press SELECT.
4. The screen displays Tone: with the
current setting flashing. Press q or p
to choose a ringer tone. A sample of
each ringer tone plays as you scroll
Temporary ringer silencing
When the telephone is ringing, you can
temporarily silence the ringer without
disconnecting the call. The next call rings
normally at the preset volume.
To silence the handset ringer:
• Press CANCEL or MUTE. The handset
displays Ringer muted.
Retrieve voicemail from
telephone service
Voicemail is a feature available from most
telephone service providers. It may be
included with your telephone service, or
may be optional. Fees may apply.
Retrieve voicemail
When you received a
voicemail, the handset
displays and New
voicemail.
To retrieve, you typically
dial an access number provided by your
telephone service provider, and then enter
a security code. Contact your telephone
service provider for instructions on how to
configure the voicemail settings and listen
to messages.
• After you have listened to all new voicemail
messages, the indicators on the handset turn
off automatically.
Del all calls
p
q
Delete all?
New voicemail
10:15 PM
12/25
To Next Page
Loading...
