2 3
Overview
Handset overview
1 – Handset earpiece
2 – LCD display
3 – CID/VOL-
• Review the caller ID log when the
telephone is not in use.
• Scroll down while in a menu, or in the
directory, caller ID log or redial list.
• Move the cursor to the left when
entering numbers or names.
• Decrease the listening volume during a
call.
4 – /FLASH
• Make or answer a call.
• Answer an incoming call when you
receive a call waiting alert.
5 – 1
• Press repeatedly to add or remove 1 in
front of the caller ID log entry before
dialing or saving it to the directory.
6 – TONE
• Switch to tone dialing temporarily
during a call.
7 – MUTE/DELETE
• Mute the microphone during a call.
Telephone base overview
1 – /FIND HANDSET
• Page all system handsets.
2 – Charging pole
Charger overview
1 – Charging pole
Display icons overview
The battery icon flashes when
the battery is low and needs
charging.
The battery icon animates
when the battery is charging.
The battery icon becomes
solid when the battery is fully
charged.
There are new voicemail
received from your telephone
service provider.
NEW There are new caller ID log
entries.
Connect
You can choose to connect the telephone
base for desktop usage or wall mounting.
• Use only the adapters provided.
• Make sure the electrical outlets are not
controlled by wall switches.
• The adapters are intended to be correctly
oriented in a vertical or floor mount position.
The prongs are not designed to hold the
plug in place if it is plugged into a ceiling,
under-the-table or cabinet outlet.
TIP
• If you subscribe to digital subscriber line
(DSL) high-speed Internet service through
your telephone line, make sure you install
a DSL filter (not included) between the
telephone line cord and telephone wall jack.
Contact your DSL service provider for more
information.
Connect the telephone base
• Silence the handset ringer temporarily
while the phone is ringing.
• Delete the displayed entry while
reviewing the directory, caller ID log or
redial list.
• Delete digits or characters when
entering numbers or names.
8 – Microphone
9 – Charging pole
10 – MENU/SELECT
• Show the menu.
• While in a menu, press to select an item,
or save an entry or setting.
11 – /VOL+
• Review the directory when the phone is
not in use.
• Scroll up while in a menu, or in the
directory, caller ID log or redial list.
• Move the cursor to the right when
entering numbers or names.
• Increase the listening volume during a
call.
12 – OFF/CANCEL
• Hang up a call.
• Return to the previous menu or idle
mode without making changes.
• Delete digits while predialing.
• Silence the handset ringer temporarily
while the phone is ringing.
• Erase the missed call indicator while the
handset is not in use.
13 – 0/OPER
• Enter space character during text
editing.
14 – #
• Show other dialing options when
reviewing a caller ID log entry.
15 – REDIAL/PAUSE
• Review the redial list.
• Insert a dialing pause while dialing or
entering numbers into the directory.
16 – Battery compartment cover
To Next Page
Loading...
