20 21
There is
interference
during a
telephone
conversation.
My calls fade
out when
I am using
the cordless
handset.
The handset may be out
of range. Move it closer to
the telephone base.
If you subscribe to high-
speed Internet service
(DSL - digital subscriber
line) through your
telephone line, you must
install a DSL filter between
the telephone line cord
and the telephone wall
jack. The filter prevents
noise and caller ID
problems caused by DSL
interference. Contact your
DSL service provider for
more information about
DSL filters.
Appliances or other
cordless telephones
plugged into the
same circuit as the
telephone base can
cause interference. Try
moving the appliance or
telephone base to another
outlet.
The location of your
telephone base can
impact the performance
of your cordless phone.
For better reception,
install the telephone base
in a centralized location
within your home or
office, away from walls
or other obstructions.
In many environments,
elevating the telephone
base improves overall
performance.
I subscribe to a
nontraditional
telephone
service that uses
my computer
to establish
connections,
and my
telephone
doesn’t work.
Make sure your computer
is powered on, and
your Internet is working
properly.
Make sure to plug your
USB telephone adapter
into a dedicated USB port
on your computer. Do not
plug into a multiple port
USB hub (USB splitter) that
is not powered.
In a few rare instances,
the USB port on your
computer may not have
enough power. In these
instances, try using a USB
hub with its own external
power supply.
If you are using a firewall,
it may prevent access
to your nontraditional
telephone service. Contact
your service provider for
more information.
I accidentally
set my LCD
language to
Spanish or
French, and I
don’t know how
to change it
back to English.
While the handset is not in
use, press MENU and then
enter 364# to change
the handset LCD language
back to English.
The RBRC
®
seal
The RBRC
®
seal on the nickel-metal
hydride battery indicates that VTech
Communications, Inc. is voluntarily
participating in an industry program to
collect and recycle these batteries at the
end of their useful lives, when taken out
of service within the United States and
Canada.
The RBRC
®
program provides a convenient
alternative to placing used nickel-
metal hydride batteries into the trash or
municipal waste, which may be illegal in
your area.
VTech’s participation in RBRC
®
makes it
The telephone
does not
receive caller
ID or the
telephone does
not show caller
ID during call
waiting.
Caller ID is a subscription
service. You must
subscribe to this service
from your telephone
service provider for this
feature to work on your
telephone.
Both your and the caller’s
telephone service
providers must use
equipment compatible
with the caller ID service.
The caller may not be
calling from an area which
supports caller ID.
The caller ID information
displays after the first or
second ring.
The display
shows Out of
range or no pwr
at base.
The handset may be out
of range. Move it closer to
the telephone base.
Make sure the power cord
is securely plugged into
the telephone base. Use
a working electrical outlet
not controlled by a wall
switch.
I cannot hear
any instruction
from the
handset when
I try to record,
play or delete
my own
announcement.
The handset does not
have a speakerphone.
When recording,
playing or deleting your
own announcement,
the instructions are
announced through the
handset receiver. Make
sure you place the handset
receiver close to your ear.
easy for you to drop off the spent battery
at local retailers participating in the RBRC
®
program or at authorized VTech product
service centers. Please call
1-800-8-BATTERY
®
for information on
Ni-MH battery recycling and disposal
bans/restrictions in your area. VTech’s
involvement in this program is part
of its commitment to protecting our
environment and conserving natural
resources.
The RBRC seal and 1-800-8-BATTERY
®
are
registered trademarks of Call2recycle, Inc.
FCC, ACTA and IC regulations
FCC Part 15
This equipment has been tested and
found to comply with the requirements
for a Class B digital device under Part 15 of
the Federal Communications Commission
(FCC) rules. These requirements are
intended to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
To Next Page
Loading...
