To Next Page

To Previous Page

Bluetooth

Pair a headset

Before you begin, make sure that your Bluetooth enabled

headset is not connected to any other Bluetooth device.

Refer to your headset user's manual to learn how to search

for or add new Bluetooth devices.

To pair and connect a headset:

Press MENU/SELECT on the handset when it is not

in use.

Press or to highlight Bluetooth, then press

MENU/SELECT.

Press or to highlight Add headset, then press

MENU/SELECT. The screen displays ADD HEADSET

Place Bluetooth headset next to base.

Press SELECT.

If there are already four paired devices on the

paired devices list, the screen will show Maximum

of 4 devices can be paired and prompt you to

replace an existing paired device (page 21).

Press MENU/SELECT. The screen displays

Please set your headset to discoverable mode,

then press SELECT.

If a device is already connected to the telephone

base, the screen displays Connected device will

be temporarily disconnected. Press SELECT.

Press MENU/SELECT to temporarily disconnect the

device and continue the pairing process.

Set your headset to discoverable mode (refer to the

user’s manual of your headset).

Press MENU/SELECT to search for your headset.

Once the telephone base nds your headset, press

MENU/SELECT.

Enter the PIN of your headset. The PIN for most

Bluetooth devices is 0000 (refer to the user’s manual of

your headset). Then press MENU/SELECT.

•

Ans. system

VTech DS6322-4 User Manual

Other manuals for VTech DS6322-4