65
Answering system operation
See page 27 to set the handset ringer volume.
New message indication
The message window on the telephone base ashes and the handset shows
and New messages when there are new answering system messages.
If the new message alert tone is turned on, the telephone base beeps every
10 seconds when there are messages that have not been reviewed.
Call intercept
When a caller is leaving a message on your answering system, you can
stop recording and talk to the caller by pressing /HOME/FLASH or on
the handset.
Telephone base ringer volume
Press /VOL
+
or /VOL
-
on the telephone base to adjust the ringer volume
when the telephone is not in use. When you set the ringer volume to zero, the
base ringer is off and the system announces, “Base ringer is off.”
To Next Page
Loading...
Need help?
General
