VTech ErisStation VCS702 - Settings; Using the Menu; Ringer Volume

Using the Menu
You can enter the menu to change the settings.
In the ringers menu, you can adjust the ringer volume and select the ringer tones for
incoming calls.
In the set date/time menu, you can set the date and time which will be displayed on
the base unit when idle, or showing caller ID information.
In the settings menu, you can change the settings for LCD language, base name,
key tone, dial mode, area code, and loop gain. You can also reset the base unit to
default settings.
To enter the menu:
Press when the base unit is not in use.
Press or to scroll to the desired feature menu.
Press to enter that menu.
To return to the previous menu or idle, press .
Ringer volume
You can adjust the ringer volume from or turn the ringer off on the base unit.
When the base unit is not in use, press or to choose the desired ringer
volume or Ringer off.
-OR-
Press when the base unit is not in use.
Press or to scroll to Ringers, and then press .
Press again to select Ringer volume.
Press or choose the desired ringer volume or Ringer off.
Press to save your selection. You hear a confirmation tone.
If you turn off the ringer volume, the screen will display Ringer off on idle screen. When the
ringer volume is off, the base unit is silenced for all incoming calls.
1.
2.
3.
•
•
1.
2.
3.
4.
5.
Settings
10