VTech ErisStation VCS702 User Manual

Settings
13
Key tone
You can adjust the key tone volume or turn the key tone off for the base unit. If the
key tone is on, the base unit beeps with each key press. If the key tone is off, there
are no beeps when you press the keys.
Press when the base unit is not in use.
Press or to scroll to Settings, and then press .
Press or to scroll to Key tone, and then press .
The base unit displays KEY TONE with the current setting. Press or to
choose the desired key tone volume or Off.
Press to save your selection. You hear a confirmation tone.
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you must
change the dial mode to pulse dialing before using the base unit to make a call.
Press when the base unit is not in use.
Press or to scroll to Settings, and then press .
Press or to scroll to Dial mode, and then press .
Press or to choose Touch-tone or Pulse.
Press to save your selection. The screen shows DIAL MODE is
touch-tone/pulse briefly. You hear a confirmation tone.
You can press to switch to tone dialing temporarily when using pulse service while on a call.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.

VTech ErisStation VCS702 Specifications

General

Brand	VTech
Model	ErisStation VCS702
Category	Conference Phone
Language	English