VTech ErisStation VCS702 User Manual

Settings
14
Area code
If you dial local calls using only seven digits (area code not required), you can
program your home area code so that when you receive a call within your local area,
the telephone number is automatically stored in the call log without the area code.
Press when the base unit is not in use.
Press or to scroll to Settings, and then press .
Press or to scroll to Area code, and then press .
The base unit displays Only for 7digit from CID briefly and then AREA CODE:.
Use the dialing keys to enter the 3-digit area code.
Press or to move the cursor to the left or right.
Press to erase a digit.
Press and hold to erase all digits.
Press to save your selection. The screen shows Area code will not show
in CID briefly. You hear a confirmation tone.
Loop gain
The default settings of the loop gain feature is Off. Turn this feature on only when the
callers cannot hear you well, and you are using a public switched telephone network
(PSTN) line.
Press when the base unit is not in use.
Press or to scroll to Settings, and then press .
Press or to scroll to Loop gain, and then press .
Press or to choose Loop gain: On or Loop gain: Off.
Press to save your selection. You hear a confirmation tone.
Turn the loop gain feature back to Off if the callers cannot observe any improvement or are
experiencing any new audio issues like echo or dropout.
1.
2.
3.
4.
•
•
•
5.
1.
2.
3.
4.
5.

VTech ErisStation VCS702 Specifications

General

Brand	VTech
Model	ErisStation VCS702
Category	Conference Phone
Language	English