VTech FS6414-A - 3.3 LCD Display Icons and Symbols

7
SET UP THE TELEPHONE
2.6 Wall Mounting
Your FS6414-A/FS6414-2A/FS6414-3A is designed to mount on a standard wall
mounting plate. Refer to the steps below to wall mount your FS6414-A/FS6414-2A/
FS6414-3A cordless phone:
Plug the provided line cord and the power cable to the socket at the bottom of the
base respectively.
Thread the line cord and power cable through the corresponding slot. Plug the
other end of the line cord and the power cable into the telephone wall socket and
the power socket respectively.
Place the cordless phone over the two retaining screws of your standard wall
mount plate as indicated. Slide the phone downward into position.
WARNING
Do not place your FS6414-A/FS6414-2A/FS6414-3A in the bathroom or other humid
areas.
1.
2.
3.
If you have DSL high
speed Internet service,
DQ'6/¿OWHUQRW
included) is required.