TROUBLE SHOOTING
Common cure for
electronic equipment.
If the telephone is not responding normally, put the
handset in the telephone base. If it does not respond, try
the following (in the order listed):
Disconnect the power to the telephone base.
Disconnect the batteries on the handset.
Wait a few minutes before connecting power to the
telephone base.
Re-install the batteries and place the handset in the
telephone base.
Wait for the handset to synchronize with the telephone
base. Allow up to one minute for this to take place.
•
•
•
•
•
This telephone is not equipped with a grounding function. Therefore, some of the
functions may be limited when used in PBX systems.
Please contact the technical support of the network provider for further information.
To Next Page
Loading...
Need help?
General
