VTech IS8251-3

37
use robocalls to communicate important information to you. Robocalls uses an
autodialer to deliver pre-recorded messsages. By entering the EXACT Caller ID
(CID)’s name of the organizations into the Star name list, it ensures these calls will
ring through when you only know the caller names but not their numbers.
Add numbers from caller ID log with handset
Adding CID log
entry to block list
1. Press CID on the handset or telephone base →p/q.
• Press when the desired entry appears.
2. Press porq→ To Block list → .
3. Press twice.
Adding CID log
entry to star name
list
1. Press CID on the handset or telephone base →p/q.
• Press when the desired entry appears.
2. Press porq→ To Star name list → .
3. Press twice.
Add numbers manually with handset
Adding a new
number to the block
list
1. Press CALL BLOCK.
2. Press porq→ Block list → .
3. Press porq→ Add new entry → .
4. Enter a telephone number up to 30 digits → .
5. Enter a name up to 15 characters → .
Adding a new
number to the star
name list
1. Press CALL BLOCK.
2. Press porq→ SCB settings → .
3. Press porq→ Star name list → .
4. Press porq→ Add new entry → .
5. Enter a name up to 15 characters → .