7
Install and charge the battery
Install the battery
Install the battery as shown below.
• Use only the rechargeable batteries
provided or replacement batteries (model
BT205662).
• Do not use other alkaline, manganese or
Ni-Cd batteries, nor other non-rechargeable
batteries for operating the cordless handset.
They may cause failure or malfunction of the
handset or the telephone system.
• Charge the batteries provided with this
product only in accordance with the
instructions and limitations specified in this
manual.
• If the handset will not be used for a long
time, disconnect and remove the batteries to
prevent possible leakage.
Charge the handset battery
Place the handset in the charging cradle to
charge.
Once you have installed the battery, the
handset LCD display indicates the battery
status (see the table on the next page).
• Press CANCEL on the handset or place the
handset in the charging cradle will bypass
the set date and time.
• For best performance, keep the handset in
the charging cradle when not in use.
• The battery is fully charged after 12 hours of
continuous charging.
12 hrs
To Next Page
Loading...
