46
Sound settings
Key tone
The cordless handset is set to beep with
each key press. You can adjust the key tone
volume or turn it off. If you turn off the key
tone, there are no beeps when you press
keys.
1. Press MENU on the cordless handset in
idle mode to enter the main menu.
2. Press q or p to choose Settings and
then press SELECT.
3. Press q or p to choose Key tone, then
press SELECT.
4. Press q or p to sample each volume
level, then press SELECT to save. You
hear a confirmation tone.
Handset and base ringer tone
You can choose from different ringer tones
for the cordless handset and telephone
base.
1. Press MENU on the cordless handset in
idle mode to enter the main menu.
2. Press q or p to choose Ringers and
then press SELECT.
3. Press q or p to choose Handset or
Base, and then press SELECT.
4. Press q or p to choose Ringer tone,
then press SELECT.
5. Press q or p to sample each ringer
tone.
6. Press SELECT to save. You hear a
confirmation tone.
• If you turn off the ringer volume, you will not
hear ringer tone samples.
Handset and base ringer volume
You can adjust the cordless handset and
telephone base ringer volume levels, or
turn the ringer off.
If you turn both handset and base ringer
off, the caller ID will not be announced.
1. Press MENU on the cordless handset in
idle mode to enter the main menu.
2. Press q or p to choose Ringers and
then press SELECT.
3. Press q or p to choose Handset or
Base, and then press SELECT.
4. Press SELECT again to choose Ringer
volume.
5. Press q or p to sample each ringer
volume level.
6. Press SELECT to save. You hear a
confirmation tone.
-OR-
Slide the VOL control on the cordless
handset or on the telephone base to adjust
the volume.
• For hearing protection, do not put
the cordless handset near your ear
when the telephone is ringing. Loud
ringer sound may damage your
hearing. Adjust the volume to lower
the ringer sound if you find it too loud.
• If the ringer volume is set to Off, the idle
screen displays and Ringer off.
• When the ringer volume is set to Off, the
handset still rings when you press PAGE/
INTERCOM at the telephone base.
To Next Page
Loading...
Need help?
General
