55
3. Press q or p to choose Voicemail #
and then press SELECT.
4. Use the dialing keys to enter the
voicemail number (up to 30 digits).
5. Press SELECT to save. The handset
displays Voicemail # saved. You hear a
confirmation tone.
While entering numbers, you can:
• Press DELETE to backspace and erase a
digit.
• Press and hold DELETE to erase the
entire entry.
• Press q or p to move the cursor to the
left or right.
• Press and hold PAUSE to insert a dialing
pause.
Turn off the new voicemail
indicators
If you have retrieved your voicemail while
away from home, and the handset still
displays the new voicemail indicators, use
this feature to turn off the indicators.
• This feature turns off the indicators only, it
does not delete your voicemail messages.
1. Press MENU on the cordless handset in
idle mode to enter the main menu.
2. Press q or p to choose Settings and
then press SELECT.
3. Press q or p to choose Clr voicemail
and then press SELECT.
4. The screen displays Reset Voicemail
Indicator?. Press SELECT to confirm.
You hear a confirmation tone.
Remote access
A two-digit security code is required to
access the answering system remotely
from any touch-tone telephone. The preset
code is 19. You can use this preset code, or
set your own.
Access your answering system
remotely
1. Dial your telephone number from any
touch-tone telephone.
2. Enter the two-digit security code after
the announcement and the long beep.
3. Enter one of the following remote
commands.
Command Description
1 Play all messages.
2 Play only new messages.
3 Delete the current message
(during playback).
33 Delete all old messages.
4 Repeat the current message
(during playback).
5 Stop.
*5 Hear a list of remote
commands.
6 Skip to the next message
(during playback).
*7 Record a new
announcement.
8 End the call.
0 Turn the answering system
on or off.
4. Hang up or press 8 to end the call.
To Next Page
Loading...
Need help?
General
