17
Wall mount to tabletop installation
To change the telephone base from the wall mount
position to tabletop position, follow the steps below.
Remove the telephone base from the mounting
plate. Unplug the telephone line cord from the
and remove the cord from the
slots under the telephone base.
Lift the handset and place it aside. On the telephone
base, pull out the handset tab and rotate it 180
degrees. Replace the handset tab back to the
grooves until it clicks into position.
1.
2.
Remove the bracket from the base. Hold the
telephone the bracket
downwards as the arrows indicate.
3.
To Next Page
Loading...
