www.vtechphones.com
11
Basic operation
Telephone operation
Temporary tone dialing
If you have pulse (rotary) service, you can change from pulse to touch tone dialing during a call by
pressing TONE
*
.
1. Dial the number.
2. Press TONE
*
. Buttons pressed after this send touch tone signals.
3. After you hang up, the phone automatically returns to pulse service.
Operating range
This cordless telephone operates within the maximum power allowed by the Federal
Communications Commission (FCC). Even so, this handset and base unit can communicate over only
a certain distance — which can vary with the locations of the base unit and handset, the weather,
not connect well when you press TALK. Move closer to the base unit, then press TALK to answer
the call.
If you move out of range during a telephone conversation, there might be noise or interference. Totelephone conversation, there might be noise or interference. To conversation, there might be noise or interference. To
improve reception, move closer to the base unit.
If you move out of range without pressing OFF, the telephone will be left off the hook. To hang up
properly, walk back into range, periodically pressing OFF.
• Temporary tone
dial mode is useful
if it is necessary
to send touch tone
signals to access
telephone banking
or long distance
services.
• For clearer
reception while on
a call, press the
CHAN button until
the interference
has been
eliminated.
To Next Page
Loading...
Need help?
General
