VTech VDP650 User Manual

20
To install the handset battery:
1. Plug the battery connector securely into the socket inside the handset battery
compartment. Insert the supplied battery with the label THIS SIDE UP facing
up as indicated.
2. Align the cover at against the battery compartment, then slide it upwards
until it clicks into place.
3. Charge the handset by placing it face forward in the charger. The battery icon
indicates the charge status as the battery charges.
IMPORTANT INFORMATION
• Use only the supplied rechargeable battery or replacement battery
(model BT264392). To order a replacement battery, visit our website at
businessphones.vtech.com or call 1 (888) 370-2006.
• If you do not use the handset for a long time, disconnect and remove the
battery to prevent possible leakage.
Very low battery charging
less than 30 minutes.
Charging 30 to 80 minutes.
Charging 80 minutes
to 7 hours.
Charging more than 7 hours.
Fully charged at 11 hours.
Battery Pack
BT164392/BT264392
2.4V 550mAh Ni-MH
WARNING:DO NOT BURN OR
PUNCTURE BATTERIES
MADE IN CHINA CR1733
Battery Pack
BT164392/BT264392
2.4V 550mAh Ni-MH
WARNING:DO NOT BURN OR
PUNCTURE BATTERIES
MADE IN CHINA CR1733
Battery Pack
BT164392/BT264392
2.4V 550mAh Ni-MH
WARNING:DO NOT BURN OR
PUNCTURE BATTERIES
MADE IN CHINA CR1733
GP1250

VTech VDP650 Specifications

General

Brand	VTech
Model	VDP650
Category	Telephone
Language	English