VTech VDP650 User Manual

48
Conguring the Handset
You can congure the phone using one of two methods:
1. The Features and User settings menus on the phone.
2. The WebUI, which you access using your Internet browser.
This section describes settings you can change using your
handset. For information about settings you can change on the
WebUI, see “WebUI” on page 58.
The system administrator can congure additional settings,
including Network settings, Provisioning, and the PIN code by
using the Admin settings menu. For more information about this
menu, see the VDP650 Administrator and Provisioning Manual,
available at businessphones.vtech.com.
Setting do not disturb
When Do Not Disturb (DND) is on for an account, calls to that account will be
rejected.
To turn DND on or o󰀨:
1. Press MENU.
2. Press q to scroll to Features and press SELECT.
3. With DND highlighted, press SELECT.
4. Press p or q to select which account DND should apply to*,
then press SELECT.
5. Press p or q to choose On or O󰀨.
6. Press
SET
to save.
* Note that DND will apply to all handsets assigned the account.
Setting call forwarding
Calls can be forwarded to another phone number always, only when busy, or
after a set number of rings.
To set call forward:
1. Press MENU.
2. Press q to scroll to Features and press SELECT.
3. Press q to scroll to Call forwarding and press SELECT.
4. Press p or q to select which account Call forward should
apply to*, then press SELECT.
5. Press p or q to choose the desired option:
• Always
• Busy
• No answer

VTech VDP650 Specifications

General

Brand	VTech
Model	VDP650
Category	Telephone
Language	English