Need help?Do you have a question about the Wabtec Microphor MICROFLUSH LF-210 and is the answer not in the manual?
Provides contact details for customer support and dealer inquiries.
Details on filter-regulator purpose, installation, and ensuring moisture removal.
Guidance on air compressor placement, oil levels, and sizing.
Steps for unpacking and initial preparation of the toilet before mounting.
Specifies air line size based on run length and installation of filter-regulator.
Details water line size, shut-off valve, and pressure requirements.
Instructions for connecting the drain, including for specific models.
Instructions for connecting the water supply, including model-specific notes.
Steps to turn on air supply and check for leaks.
Connects the airline to the flush activator and checks for leaks.
Turns on water, checks for leaks, and performs initial flushes.
Verifies air pressure at the toilet is within the specified range.
Verifies water pressure at the toilet is within the specified range.
Checks the water level in the bowl against the flapper opening.
Directs users to troubleshooting sections if the unit malfunctions.
Describes the two types of flush activators: Standard and Positive.
Instructions for cleaning the bleed-off plug for standard flush activators.
Instructions for cleaning the bleed-off plug and detent valve for positive flush.
Outlines the schedule for lubricating the Air/Water Sequence Valve.
Steps for cleaning the toilet bowl using approved cleaners.
Procedures for clearing blockages in the toilet.
Steps to prepare the toilet for freezing temperatures or extended storage.
Lists critical warnings regarding lubricants, adhesives, and Teflon tape.
Lists Microphor toilet patents.
Microphor's policy on product and design changes.
Checks for water turned on and correct pressure.
Checks air supply, pressure, leaks, and moisture.
Checks for correct flapper cycle time and bleed-off plug status.
Lists common operational problems and their corresponding causes and corrections.
Diagram and list of components for the toilet shell.
Diagram and list of components for the remote assembly.
Diagram and list of components for the rear discharge hopper.
Diagram and list of components for the downward discharge hopper.
Lists part numbers for LF-210 toilet models.
Lists part numbers for LF-219 integral toilet models.
Lists part numbers for LF-219 remote toilet models.
Details the color-coded airline connections from the valve to components.
Lists available service kits and their part numbers.
Lists components and part numbers for the Air/Water Sequence Valve.
Step-by-step instructions for replacing the toilet hopper.
Guide for adjusting the air cylinder for proper flapper operation.
Instructions for replacing the flapper gasket.
Explains the operational sequence of the Air/Water Sequence Valve.
Describes the step-by-step process of a toilet flush cycle.
Provides installation dimensions for the LF-210 downward discharge model.
Provides installation dimensions for the LF-210 rear discharge model.
Provides installation dimensions for the LF-210 remote flush system.
Provides installation dimensions for the LF-219 downward discharge model.
Provides installation dimensions for the LF-219 rear discharge model.
Provides installation dimensions for the LF-219 integral flush model.
Provides installation dimensions for the LF-219 remote flush system.
Details pricing policies and subject to change.
Outlines payment terms, credit investigation, and legal action.
Defines F.O.B. factory, customer responsibility for claims, and delivery delays.
Details the two-year limited warranty for Microphor products.
To Next Page
General