BA 1001/1501/2001 us – Edition 3.3 * 12001b530.fm 5-31
Maintenance
Exterior of the machine
Cleaning the machine can cause engine damage.
☞Protect the engine against humidity
The following articles are generally suitable:
• High-pressure cleaner
• Steam jet
Engine compartment
Injury hazard when working on a running engine!
Can cause severe injury or death.
• Stop the engine before performing maintenance.
• Remove the starting key and carry it with you.
When cleaning the engine with a water or steam jet
☞The engine must be cold
☞and do not point the jet directly at electric sensors such as the oil pressure switch.
The humidity penetrating any such sensors causes them to fail and leads to
engine damage!
Threaded fittings and attachments
All threaded fittings must be checked regularly for tightness, even if they are not listed in
the maintenance schedules.
☞Engine fastening screws
☞Fastening screws on the hydraulic system
☞Line and pin fastenings on the attachment
Retighten loose connections immediately. Contact a Wacker Neuson service center if necessary.
Pivots and hinges
Lubricate all mechanical pivots on the machine (such as joints) and fittings at regular inter-
vals even if they are not listed in the lubrication plan.
To Next Page
Loading...
