EasyManuals Logo

Wacker Neuson 1501 User Manual

Wacker Neuson 1501
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #96 background imageLoading...
Page #96 background image
5-12 BA 1001/1501/2001 us – Edition 3.3 * * 12001b510.fm
Maintenance
5.5 Engine and hydraulics cooling system
The oil/water radiator is located in the engine compartment, behind the engine. It cools the
diesel engine, and the hydraulic oil of the drive and operating hydraulics.
The coolant reservoir is located in the engine compartment next to the toolbox.
Specific safety instructions
Dirt on the radiator fins reduces the radiator’s heat dissipation capacity! To avoid this:
Clean the outside of the radiator at regular intervals. Use oil-free compressed air (2
bar max.) to clean. Maintain a certain distance from the radiator to avoid damage to
the radiator fins. Refer to the maintenance plans in the appendix for the cleaning
intervals
In dusty or dirty work conditions, clean more frequently than indicated in the mainte-
nance plans
An insufficient coolant level reduces the heat dissipation capacity as well and can
cause engine damage! Therefore:
Check the coolant level at regular intervals. Refer to the maintenance plans in the
appendix for the intervals
If coolant must be added frequently, check the cooling system for leaks and/or con-
tact your dealer!
Never add cold water/coolant if the engine is warm!
After filling the coolant reservoir, make a test run with the engine and check the cool-
ant level again after stopping the engine
The use of the wrong coolant can destroy the engine and the radiator. Therefore:
Add enough antifreeze compound to the coolant – but never more than 50 %. If pos-
sible use brand-name antifreeze compounds with anticorrosion additives
Observe the coolant compound table
Do not use cooler cleaning compounds if an antifreeze compound has been added to
the coolant – otherwise this causes sludge to form, which can damage the engine
Once you have filled the coolant reservoir:
Test run the engine
Stop the engine
Let the engine cool down
Check the coolant level again
Environment
Use a suitable container to collect fluids and lubricants as they flow out and
dispose of them in an environmentally friendly manner.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson 1501 and is the answer not in the manual?

Wacker Neuson 1501 Specifications

General IconGeneral
BrandWacker Neuson
Model1501
CategoryUtility Vehicle
LanguageEnglish

Related product manuals