Wacker Neuson BPS1030A - Page 45

Maintenance
Maintenance work 9.3
2
2. Remove deposit cup, filter and O-ring 2.
3. Clean and dry deposit cup and filter.
4. Replace the O-ring, filter and sedimentation cup.
1
A
5. Move the fuel cock1 into positionA.
6. Check fuel system for leaks.
9.3.7 Checking spark plug
NOTICE
Danger of engine damage!
An incorrect spark plug can cause engine damage, see Technical Data
on page 51.
► Correct electrode spacing.
► Free of deposits.
1
1. Pull out spark plug connector.
2. Remove dirt from the spark plug area.
3. Unscrew spark plug and check.
4. Replace if damaged or heavily soiled.
5. Measure electrode spacing 1, see Technical Data on page 51.
ð Correct the electrode spacing by carefully bending it.
6. Tighten the spark plug again, tightening torque 18 Nm.
7. Plug the spark plug connector onto the spark plug.
[en] | Version: 5 | 01/2023 | 5100060577 | BPS1030A, BPS1135A, BPS1340A, BPS1550A, BPS2050A | BPS | Operator’s
Manual 45
9