Transport to work site/Recommendations on compaction
T01030GB.fm 27
3. Transport to work site/Recommendations on compaction
3.1 Transport to work site
Conditions:
To transport the vibration plate, use only suitable lifting equipment with
a minimum load-bearing capacity of 400 kg.
Always switch off engine before transporting the machine!
Vertically set guide handle head and lock into place.
Only attach suitable tackle at the central lifting point (1) provided
(torque wrench setting = 85 Nm).
During transport on the loading area of a vehicle, tie down the vibraion
plate using the lugs (2).
Note: Also oserve the regulations in the safety instructions.
To Next Page
Loading...
