Wacker Neuson BPU 4045 - Faults

Faults
T01034GB.fm 42
7. Faults
7.1 Forward speed too low
7.2 Reverse speed too low
7.3 No reverse motion
7.4 Loss of hydraulic oil
Cause Remedy
To little hydraulic oil in the centre pole
head.
Top up hydraulic oil.
Air in hydraulic control. Bleed system.
Cause Remedy
Too much hydraulic oil in centre pole
head.
Correct oil level in accordance with
mark.
Cause Remedy
Mechanical fault. Contact Wacker Neuson service dept.
Cause Remedy
Leaks, hydraulic hose defective. Contact Wacker Neuson service dept.