Operation
T01031GB.fm 30
4.2 Starting the engine
Once these points have been observed, you can start the engine as
follows:
1. Turn the fuel valve to the ON position.
2. Move the choke lever to the CLOSE position.
Take notice: If the engine is warm or the air temperature is high,
move the control lever away from the CHOKE postion as soon as
the engine starts.
3. Move the throttle lever slightly to the left.
Take notice: With recoil starter:
4. Turn the engine switch to the ON position.
5. Pull the starter grip lightly until resistance is felt, then pull briskly.
Caution: Do not allow the starter grip to snap back against the
engine. Return it gently to prevent damage to the starter.
1)
2) 3)
4)
5)