Operation
T01031GB.fm 31
4.3 Handling
As the engine warms up, gradually move the choke lever to the OPEN
position.
Position the throttle lever for the desired engine speed.
Oil alert system
The oil alert system is designed to prevent engine damage caused by
an insufficient amount of oil in the crankcase. Before the oil level in the
crankcase drops below a safe limit, the oil alert system will
automatically shut down the engine (the engine switch will remain in
the ON position).
4.4 Forward and reverse motion
The engine speed can be infinitely varied on the throttle control lever.
The direction of travel is determinet with the shift lever (6).
Depending on the position of the shift lever (6), the vibration plate
compacts in forward direction, at standstill or in reverse direction.
The forward and reverse speeds can be varied by selecting
intermediate positions of the shift lever (6) or the machine can be
employed for particularly intensive compaction at standstill.
1 Engine switch
2 Note:
If engine does not start
check oil level
Forwards
Reverse
On the spot
To Next Page
Loading...
Need help?
General
