EH 9 Maintenance
37
8 Maintenance
8.1 Maintenance schedule
WARNING
Improper handling can result in injury or serious material damage.
f Read and follow all safety instructions of this operator's manual, see chapter
Safety.
Task Daily be-
fore oper-
ation
Every
20 hrs.
Monthly
Check power cable for perfect
condition – if power cable is
defective, have it replaced. *
* Have these tasks carried out by the service department of your Wacker
Neuson contact person.
Visual inspection of all parts
for damage.
Clean the machine.
Check shanks and cutting
edges of tool – sharpen, re-
forge or replace as needed.
Lubricate crank mechanism.
Check tool holder for wear –
have it changed, if necessary.
*
To Next Page
Loading...
Need help?
General
