EH 9 Safety
9
3Safety
3.1 Principle
State of the art
This machine has been constructed with state-of-the-art technology according to
the recognized rules of safety. Nevertheless, when used improperly, dangers to
the life and limb of the operator or to third persons or damage to the machine or
other materials cannot be excluded.
Proper use
The machine must only be used for the following purposes:
Breaking, chiseling, digging, puddling, hammering, ramming and deburring
tasks.
Processing natural and synthetic stone.
Processing asphalt and any type of masonry and concrete.
The machine may only be used with tools that are intended for use with the ma-
chine and the material being worked on.
The machine may not be used for the following purposes:
Working on hazardous materials such as asbestos.
Its proper use also includes the observance of all instructions contained in this
operator's manual as well as complying with the required service and mainte-
nance instructions.
Any other use is regarded as improper. Any damage resulting from improper use
will void the warranty and the liability on behalf of the manufacturer. The operator
assumes full responsibility.
To Next Page
Loading...
Need help?
General
