8 Maintenance
100_0402_mt_0001.fm 35
8.2 Engine oil
See blueprint: wc_gr000022
1. Drain the engine oil when the engine is warm.
2. Remove the sealing plug (a) and the drain plug (b) to drain the oil.
Comment: For environmental reasons, a bin should be placed under machine
to catch the fluid and a waterproof sheet should also be placed under the
machine to protect the ground. The fluid must be dispose of according to the
relevant regulations.
3. Reinsert the drain plug.
4. Fill the engine crankcase with the recommended engine oil up to the oil level
marking (c). For the oil quantity and type, see Technical Data.
5. Screw the sealing plug back in.
To Next Page
Loading...
Need help?
General
