EasyManuals Logo

Wacker Neuson GV 7000A User Manual

Wacker Neuson GV 7000A
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
8 Maintenance
100_0402_mt_0001.fm 39
8.6 Long-term storage
Before long-term storage:
1. Put engine fuel shut-off valve in the closed position.
2. Disconnect fuel line from the carburetor. Place the open end of the line in an
appropriate bin and open the fuel shut-off valve to empty the tank.
Gasoline is highly flammable. Drain the fuel tank in a well-vented area and away
from flames or sparks.
3. Open the drain plug on the carburetor and drain any remaining fuel from the
carburetor.
4. Change the engine oil.
5. Remove the spark plug and pour about 30 ml of clean engine oil in the
cylinder. Turn the engine over a few times to spread the oil on the inner walls
of the cylinder.
6. Pull the starter rope slowly until you notice resistance and put the handle in
this position. This ensures that the intake and exhaust vales are closed.
7. Store the generator in a dry and clean place.
WARNING

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson GV 7000A and is the answer not in the manual?

Wacker Neuson GV 7000A Specifications

General IconGeneral
BrandWacker Neuson
ModelGV 7000A
CategoryPortable Generator
LanguageEnglish

Related product manuals