Wacker Neuson PT 6L - Discharge Port

PT 6L Operation
wc_tx001597gb.fm 31
4.15 Discharge Port
See graphic: wc_gr001184
The discharge port (a) can be rotated 360° to direct water flow in any
direction.
To rotate the elbow:
4.15.1 Remove the locknuts (b) which hold the port to the pump housing.
4.15.2 Lift the port off the studs and position it as desired. Always check the
gasket and replace it if it is damaged.
4.15.3 Tighten the locknuts evenly. Torque them to 160 Nm (118 ft. lbs).
wc_gr001184
a
b