4-30
BA TH412 * 06/2017 * 4512_4-3_Warnleuchten_en.fm
4 Putting into operation
Description of the toggle switch
The position of the switches can vary depending on the
combination of different additional equipment.
Overload protection rocker switch / Rocker switch
"VLS" (Vertical Lift System)
The rocker switch 38 is located in Rocker switch panel 1.
The overload shutdown can be disabled and the working
modes of the VLS can be chosen with the rocker switch.
➥
Disabling the overload cutoff on page 5-36
➥ Description of the Vertical Lift System (VLS) on
page 5-38
The Vertical Lift System (VLS) is a safety feature that
must always be checked for correct functioning before
starting work.
➥
Functional check of the Vertical Lift System
(VLS) on page 5-39
To Next Page
Loading...
