4-32
BA TH412 * 06/2017 * 4512_4-3_Warnleuchten_en.fm
4 Putting into operation
"Horn" rocker switch / "Hazard warning system"
rocker switch (option)
The rocker switch 41 is located in the Rocker switch
panel 2. The rocker switch is used to actuate the horn or
the hazard warning system depending on the outfitting of
the vehicle.
➥
Horn (signal horn) on page 5-23
➥ Operating the hazard warning system (optional) on
page 5-21
When outfitting the vehicle with a lighting system
(optional), the switch for actuating the hazard warning
system is located in position 41.
"Working lights" rocker switch
The rocker switch 42 is located in Rocker switch panel 2.
The rocker switch has two positions. The front working
lights are switched on in the first position. The rear
working light is switched on in the second position.
➥
Operating the working lights on page 5-17
To Next Page
Loading...
