Wacker Neuson Telehandler TH412

Operation 5
BA TH412 * 06/2017 * 4512_5-9_Arbeitshydraulik_en.fm 5-37
Working modes
Two different work modes can be selected:
• Bucket mode
- (for example for loading bulk goods, manure, etc.)
• Stacking mode
- (for example for stacking big bales, general cargo,
etc.)
In bucket mode the boom always retracts in the lower
range (
Fig. 70). The boom cannot be lowered and
extended at the same time. The boom does not extend
automatically in the upper range.
In forklift mode the boom does not automatically retract
in the lower range (
Fig. 70). The boom can be lowered
and extended at the same time. The boom extends
automatically in the upper range.
The working modes are operated with the rocker switch
38 in Rocker switch panel 1.
Selecting the operating mode
Bucket mode:
• Press the rocker switch 38 to position “I” (forward).
➥ Bucket mode is activated.
Forklift mode:
• Press the rocker switch 38 to position “0” (middle
position).
➥ Forklift mode is activated.
Fig. 69
I
0
II
38
I
0