Operation 5
BA TH412 * 06/2017 * 4512_5-11_Arbeitsbetrieb_en.fm
5-71
Information about working with the dung fork
The dung fork is used for materials, such as manure in
stables, silage, hay, green fodder, large bales, etc.
Designated use
The manure fork attachment is used for loosening, picking
up, transporting and loading materials such as silage,
hay, round bales, green fodder and manure.
Installing the manure forks
➥
Re-equipping attachments on page 5-46
Control elements
Operate the dung fork with the control lever 4.
➥
Loader unit control lever on page 5-29.
Operating mode
Select stacking mode when loading large bales.
Select bucket mode for all other work.
➥
– see "Working modes" on page 5-37
Operation
➥
– see "Operation" on page 5-65
Practice using the manure forks before working with them
for the first time.
To Next Page
Loading...
