5-72
BA TH412 * 06/2017 * 4512_5-11_Arbeitsbetrieb_en.fm
5 Operation
Working with the manure forks
1. Lower the manure forks until the tines are parallel to
the ground.
2. Travel into the material.
- Pay attention to the travel speed.
3. Slightly raise the loader unit.
➥ A load is applied to the front axle of the machine.
If the material is solid, such as compacted manure, the
manure forks can be tilted in to loosen the load.
1. Travel to the unloading position in a straight line.
2. Raise the manure forks to the required height only
shortly before reaching the unloading position.
3. Travel forward as far as possible and tilt out the
manure forks.
➥ The load falls out.
To Next Page
Loading...
