Operation 5
BA TH412 * 06/2017 * 4512_5-11_Arbeitsbetrieb_en.fm
5-73
Information about working with the fork and grab
The fork and grab is used for materials, such as manure
in stables, silage, hay, green fodder, large bales, shrub
cuttings, etc.
Designated use
The fork-and-grab attachment is used for picking up,
transporting, loading and spreading loose material such
as silage, hay, straw, green fodder and manure.
Transporting tree trunks, stones and similar material is not
in accordance with its designated use.
Installing the fork-and-grab
➥
Re-equipping attachments on page 5-46
➥ Coupling/uncoupling hydraulic connections from
the mast on page 5-52
Control elements
Operate the fork and grab with the control lever 4.
➥ Loader unit control lever on page 5-29
➥ Operating hydraulic connections on the loader
unit on page 5-41
.
Operating mode
Select bucket mode.
➥
– see "Working modes" on page 5-37
Operation
➥
– see "Operation" on page 5-65
Practice using the fork-and-grab attachment before
working with it for the first time.
To Next Page
Loading...
